Five tricks to save on your electricity bill

Although this has been linked electricity price increase With the new pricing system where prices change hourly according to current supply and demand, the truth is that it would have happened anyway, even at the old "auction" price."

 

The difference is that while the previous system would have been made public and would have remained the same for a few months, with the new system we have been paying more and more throughout the summer without most people noticing until this information came to light – except for the few who check the price evolution on the Red Eléctrica website – so the effect on our wallets can be much worse.

The reality is that in the months when our reservoirs are less full and there is little wind, less renewable energy (hydroelectric and wind) is generated and more is spent from more expensive sources (thermal), so we will regularly find increases at the end of summer and decreases in winter and spring.

Either way, the combination of high prices and excessive spending is a recipe for disaster for millions of families. Spain is a rather inefficient country in its energy consumption, lagging considerably behind many of its neighbors in terms of the importance of responsible energy use.

1. Choosing the right contracted power to save on electricity:

The latest price increases have particularly affected fixed-rate plans, which, in addition to costing us a lot of money regardless of our usage, are often contracted for more than we need.

Therefore, it's important to adjust your contracted electricity power to your needs and avoid contracting for more kilowatts (kW), achieving small but consistent savings over time in most cases. Keep in mind that the power you need depends on two factors: the type and number of electrical appliances you own and their power requirements. Therefore, the most important advice is to avoid using high-power appliances (iron, air conditioner, dishwasher, oven, etc.) simultaneously and to carefully monitor your electricity usage.

Power meters are available on the market, but if you don't want to invest in one, the best approach is trial and error. The Power Control Switch (ICP), located in the electrical panel, disconnects the installation if you draw more power than you've contracted for. If it has never tripped, it could mean you have more power than you need. Test if it continues to trip by using your highest-power appliances simultaneously. If it still doesn't trip, you have room to reduce the fixed portion of your energy bill.

2. Smart use of household appliances to save on electricity:

According to the Institute for Energy Diversification and Saving (IDAE), household appliances account for 56% of energy consumption, averaging around €990 per year. Therefore, using them efficiently will allow us to achieve considerable savings.

The initial steps are of course to buy or replace, where possible, appliances that are as energy efficient as possible (energy rating A), but it goes much further, also in how we use them:

In washing machines/dishwashers: Using moderate temperature programs means that 90% of the energy is used to heat the water, and it also reduces the spin speed. In general, it's recommended to use full loads, except for appliances that allow for half-load programs, which optimize energy and water consumption. Maintenance is very important; using water softener and cleaning the filter will help make each wash more economical.

In the refrigerator/freezer, We must also perform proper maintenance, leaving sufficient space between the motor and the wall, preventing ice buildup, and ensuring the temperatures are correctly set: 5°C in the refrigerator and -18°C in the freezer. Do not put hot food in the refrigerator, as this increases energy consumption because the refrigerator will try to maintain the same temperature.

Electric stove: First, avoid using pots and pans smaller than the burners on your ceramic hob. Use efficient cookware, such as a pressure cooker, and take advantage of the residual heat after turning off the heat for the final stages of cooking. Similarly, replacing the microwave with an oven is highly recommended (65-70% savings), and if you do use an oven, the savings from turning it off a few minutes early and using the residual heat are even greater than with a ceramic hob.

On televisions/screens The energy savings offered by LED technology are significant (37% in operation compared to LCD panels), but also in standby mode (40%). Even so, turning it off completely (not leaving it in standby) will allow us to achieve moderate savings. For this, it's very helpful to use power strips with switches, which allow us to easily disconnect power to a range of appliances (the combination of televisions, DVD players, and game consoles is very common).

Finally, one appliance with huge energy spikes is the iron, especially when reaching the maximum temperature. Therefore, we achieve significant savings if we iron large quantities of clothes at once instead of distributing it over several occasions.

3. Save on lighting to save on electricity:

Changes in lighting systems have been significant in recent years, with new alternatives to the classic light bulb emerging and becoming more affordable. However, replacing all light fixtures can be expensive, so it's best to do it gradually and consider the characteristics of the area you want to illuminate.

Incandescent light bulbs: These are the ones we've always used and the ones we most urgently need to replace. Only 5% of the energy they consume is used for light, while 95% produces heat. Even though they are "cheap," their energy consumption is significant and their lifespan is very short.

Halogen light bulbs: These are the familiar spotlights we often find in hallways or living rooms. They consume a lot of energy and give off a lot of heat, but their lifespan is longer. They illuminate the area quickly, and therefore, in terms of efficiency, their ideal replacement is LED bulbs.

Fluorescent tubesThey consume 80% less energy than incandescent bulbs, making them ideal for rooms where the light is on for many hours (kitchens, offices, etc.), but they take a while to warm up. The range of combinations is constantly expanding, and the sizes are becoming smaller.

Energy-efficient light bulbsThey use the same technology as fluorescent tubes in a light bulb, so their advantages and disadvantages are the same. They suffer with repeated switching, so they aren't recommended for rooms where the light is turned on or off frequently. They are more expensive but efficient. However, not all are the same; there are cheaper models with shorter lifespans. When buying, carefully consider the options.

LED bulbsTheir price is high, although it is decreasing. They give off virtually no heat and save a lot of energy, making them ideal primarily as replacements for halogen bulbs or in places where the lights are frequently switched on and off. Their long lifespan, combined with their low energy consumption, allows you to recoup the initial investment.

In addition to adjusting our lighting system as much as possible, other tips, many of them simple, are very useful: take advantage of natural light, use light colors on walls and ceilings to make better use of natural light and reduce artificial light, don't leave lights on in rooms you're not using, keep lamps and shades clean, and as far as possible, adapt the lighting to your needs and use localized lighting, which saves energy and creates more comfortable environments.

4. Use heating and air conditioning at the appropriate temperature. to save on electricity: 

The main way to save energy is to have a thermostat that maintains the temperature within an ideal range in winter (heating) and summer (air conditioning). The ideal temperature in the colder months is 20 degrees Celsius and in summer 25 degrees Celsius. Lowering it by one degree in winter or raising it in summer will increase our energy consumption by 6-8%.

Ideally, we should invest in insulation systems, which limit energy loss to the outside (especially through windows), but if we can't do that, let's strive to maintain these temperatures by spending as little as possible on heating and air conditioning systems.

To fully ventilate a room, 10 minutes is enough. Do not cover the radiators (it is common to use them to dry clothes) or place objects that hinder heat diffusion. Bleed the radiators regularly, as the air inside them hinders heat transmission. Maintain your boiler and use it with the appropriate pressure recommended by its manufacturer.

5.Schedule the use of certain appliances during off-peak hours to save on electricity:

Although we have appliances that are used continuously, many others are very energy-intensive, which can lead us to achieve significant savings if we shift their use to certain times.

For example, on winter weekdays, peak hours, when electricity prices are generally highest, are between 8 and 11 a.m. and between 6 and 10 p.m., while on weekends and holidays, they are between 1 and 3 p.m. and between 8 and 11 p.m. During the summer, these hours shift (just like our habits and time zone), with peak hours on weekdays being between 11 a.m. and 2 p.m. and between 8 and 11 p.m. on weekdays, and between noon and 4 p.m. and between 11 p.m. and 1 a.m. on weekends and holidays. If, for example, we regulate our air conditioning use in the summer, using it less during peak electricity hours, or if we delay ironing until after peak hours, we can achieve significant savings.

Fountain LNE